Photoinitiator TPO powder CAS 75980-60-8

Short Description:

Photoinitiator TPO is mainly used for UV curing, unsaturated styrene polyester, and acrylic resin. Its UV spectrum is located in the long-wave region, which can completely cure white paint and thick coating. 

 

Contact: Erica Zheng

Email: erica@shxlchem.com

Tel: +86 21 2097 0332

Mob: +86 177 1767 9251

WhatsApp: +86 186 2503 6043 (WeChat & Telegram & Line)

Skype: slhyzy


Product Detail

Product Tags

Description

Photoinitiator TPO is a kind of highly efficient free radical (1) type photoinitiator with absorption in the long wavelength range.Because of the wide range of absorption, the effective absorption peak at 350 ~ 400 nm, soaking up to about 420 nm, its absorption peak Chemicalbook weaker than conventional initiator is long, light can generate benzoyl and phosphoryl two free radicals, can cause aggregation, so the light curing speed, it also has light bleaching, suitable for the characteristics of deep thick film and coating curing the same yellow, with low volatile, suitable for water-based. 

Specification:

Product Name  Photoinitiator TPO
Chemical Name  Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide
CAS No.  75980-60-8
Molecular Formula  C22H21O2P
Molecular Weight  348.37
Appearance   Light yellow crystal powder 
Assay  99% min
Melting point  91-95°C
Loss on drying  0.2% max
Ash  0.1% max
Acidity value  0.5mgKOH/g max

Application

As Photoinitiator, it mainly used in white system, UV curing coatings, printing inks, UV curing adhesives, photoconductive fiber coatings, photoresist, photopolymeric plates, stereoscopic lithography resins, composite materials, dental fillers, etc.

TPO is fully cured on either white or high titanium dioxide pigmented surfaces.Widely used in a variety of coatings, due to its excellent absorption properties, it is especially suitable for screen printing ink, lithography printing ink, flexo printing ink, wood coating.It can also be used for transparent coatings, especially for products with low odor requirements.

It is the best extraction solvent for petroleum aromatics unit and also used as formylation reagent in fine chemical industry.

FAQS

How should I take photoinitiator TPO?

Contact: erica@shxlchem.com

Payment terms

T/T(telex transfer), Western Union, MoneyGram, BTC(bitcoin), etc.

Lead time

≤25kg: within three working days after payment received.

25kg: one week

Sample

Available

Package

1kg per bag, 25kg per drum, or as you required.

Storage

Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.

Certificate

7fbbce232

What we can provide

79a2f3e71

  • Previous:
  • Next:

  • Write your message here and send it to us